available,
Delivery time appr. 1-3 workdays
- Order number: PAKET23003
- EAN: 4016429069326
Accessories 5
Product information "VITAS 100-AKKU starter package -compressor + 2x battery + charger + hose + 2XR-J50 + J-BOX"
DescriptionDEAL ONLY VALID UNTIL 31. MAY!
In this package you will receive a VITAS100-AKKU compressor, 1x the AKKU-SET-5,5-LHD (2x5,5 AH AKKUs + charging station), 1x the 2XR-J50 air nailer,
1x the spiral hose 6x9mm Z160.11 and 1x the matching J-BOX in addition!
Package contents:
1 pc. VITAS 100-AKKU
1 pc. AKKU-SET-5,5-LHD (2x 5,5 AH AKKUs + charging station)
1 pc. 2XR-J50 pneumatic nailer
1 pcs. spiral hose 6x9mm Z160.11
1 pc. J-BOX
Special features of the AKKU-SET-5,5-LHD:
DESCRIPTION
- 2x 5,5 LiHD battery for ultimate performance and extremely long use with minimum temperature change
- Intelligent battery management for long-lasting battery
- Patented “AIR COOLED“ charging technology
- Permanent electronic Electronic Single Cell Protection (ESCP) when charging, for particularly long life
- Processor-controlled charge and discharge management
- Capacity display to permanently monitor charge status
- Can be stored for long periods of time with almost no self-discharge
- One battery pack for every application. 100% compatible with all 18 V machines and chargers from CAS partners
- 1 AKKU-STATION 12-36 for monitored charging with microcontroller
- Battery monitoring
- Charge time approximately 30 minutes at 1.5 Ah
- "AIR COOLED" function
- To charge all Li-Ion and LiHD slide-on battery packs (12 V-36 V) with adjusted battery pack charging power
- Charger switches to compensation charge: to conserve capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere
- "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved
DIMENSIONS & WEIGHT
Weight: | 3 kg |
TECHNICAL SPECIFICATIONS
Akkutechnologie: | LiHD |
Battery capacity (Ah): | 5,5 |
Battery voltage: | 18 |
Akkufüllstandsanzeige: | ja |
CE marking: | yes |
Long tool-life: | yes |
Easy charging: | yes |
Fast-loading system: | yes |
Special features of the 2XR-J50 pneumatic nailer:
DESCRIPTION
Safety device, adjustable exhaust, side load magazine, no recoil, exhaust silencer, adjutable depth control, no mark tip
Tool works with:
Brads type J from 16 - 50mm length.
DIMENSIONS & WEIGHT
Weight: | 1.3 kg |
Width: | 56 mm |
Length: | 245 mm |
Height: | 244 mm |
TECHNICAL SPECIFICATIONS
Type of fastener: | Brads |
Fastener type: | J |
Length (mm range): | 16 - 50 |
Working pressure (bar): | 4,0 - 7,0 |
Air requirement (l/nailing): | 0,60 |
Safety yoke: | yes |
Side-loading magazine: | yes |
Safety yoke: | yes |
Depth adjustment: | yes |
Adjustable exhaust: | yes |
Silencer: | yes |
No recoil: | yes |
CE marking: | yes |
PKT-compatible: | yes, with PNEUMATIC MOBILO |
Varnish: | Powder-coated |
Weatherproof: | yes |
Splash-proof: | yes |
Light weight construction: | yes |
Rutschfester Handgriff: | yes |
Quick release tool closer: | yes |
Packaging: | Plastic Case |
Application area: | Glazing bead, Foot/ceiling batten, Decorative batten |
Fastener lenght: | 16, 19, 25, 30, 32, 35, 40, 45, 50 |
Special features for spiral hose 6x9mm Z160.11:
DESCRIPTION
Spiral hose 6 x 9 mm
- Length: 7,5 m
- Working pressure: 4 m
- Max. pressure: 13 bar
DIMENSIONS & WEIGHT
Weight: | 0.26 kg |
Special features for the VITAS100-AKKU compressor:
Battery compressor with brushless motor
Compressed air on the move: The light and compact VITAS 100-AKKU 18-volt battery compressor with brushless motor and a maximum pressure of eight bar is the perfect companion on the construction site or in the workshop. With a weight of around ten kilograms and a size of 330x310x390 millimetres, it is easy to transport and stands securely at all times with its rubberised feet. In combination with the PREBENA air tools, the oil-free piston compressor is ideal for work in interior design, woodworking and sanitary areas. With the battery charge of a 5.5 Ah battery pack, the VITAS 100-AKKU creates for example 1.100 upsetting head nails in soft wood. Manometers for boiler and outtake pressure and a universal coupling for all common connection systems guarantee easy operation.
>> Oil-free: no oil-change, no oil in condensed water
>> Integrated storage compartment for an exchangeable battery to continue working without interruption
>> Light and powerful
>> Running time with AKKU18-5,5-LiHD: approx. 60 minutes
>> Brushless motor for use in interior fittings and on construction sites
Standard Equipment:
Gauge for tank pressure, gauge for pressure exit, pressure reducer with gauge, regulated compressed air connection, vulcanised rubber feet, rubber grip handle
Weight: | 9.9 kg |
Width: | 315 mm |
Length: | 340 mm |
Height: | 380 mm |
Voltage (V): | 18 |
Vessel capacity (l): | 5 |
Intake capacity (l/min): | 100 |
Filling Capacity (l/min): | 72 |
Max. oressure (bar): | 8 |
Cylinder: | 1 |
Speed (rpm): | 2760 |
Noise characteristics dB (A): | 92 |
Oil-free / oil-lubricated: | Oil-free |
Stationary/Mobile: | Mobile |
Pneumatic air connections: | 1 |
Motor circuit breaker: | yes |
TÜV-certified safety valve: | yes |
Quick action coupling: | 1 |
Pressure regulator with pressure gauge and quick action coupling: | yes |
Air intake filter: | yes |
Drain valve on the pressure vessel: | yes |
Rubber handle: | yes |
Anti-vibration rubber feet: | yes |
Pressure gauge: | yes |
Quality pressure switch: | yes |
Pressure pipe ventilation: | yes |
Feet with suction cups: | yes |
Protective cover for engine: | yes |
Protective cover for pressure regulator: | yes |
Suitable for crane transport: | yes |
Bar-Produktfinder: | 0-10 |
Intake capacity-product finder: | 0-200 |
Product information "VITAS 100-AKKU starter package -compressor + 2x battery + charger + hose + 2XR-J50 + J-BOX"
DescriptionDEAL ONLY VALID UNTIL 31. MAY!
In this package you will receive a VITAS100-AKKU compressor, 1x the AKKU-SET-5,5-LHD (2x5,5 AH AKKUs + charging station), 1x the 2XR-J50 air nailer,
1x the spiral hose 6x9mm Z160.11 and 1x the matching J-BOX in addition!
Package contents:
1 pc. VITAS 100-AKKU
1 pc. AKKU-SET-5,5-LHD (2x 5,5 AH AKKUs + charging station)
1 pc. 2XR-J50 pneumatic nailer
1 pcs. spiral hose 6x9mm Z160.11
1 pc. J-BOX
Special features of the AKKU-SET-5,5-LHD:
DESCRIPTION
- 2x 5,5 LiHD battery for ultimate performance and extremely long use with minimum temperature change
- Intelligent battery management for long-lasting battery
- Patented “AIR COOLED“ charging technology
- Permanent electronic Electronic Single Cell Protection (ESCP) when charging, for particularly long life
- Processor-controlled charge and discharge management
- Capacity display to permanently monitor charge status
- Can be stored for long periods of time with almost no self-discharge
- One battery pack for every application. 100% compatible with all 18 V machines and chargers from CAS partners
- 1 AKKU-STATION 12-36 for monitored charging with microcontroller
- Battery monitoring
- Charge time approximately 30 minutes at 1.5 Ah
- "AIR COOLED" function
- To charge all Li-Ion and LiHD slide-on battery packs (12 V-36 V) with adjusted battery pack charging power
- Charger switches to compensation charge: to conserve capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere
- "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved
DIMENSIONS & WEIGHT
Weight: | 3 kg |
TECHNICAL SPECIFICATIONS
Akkutechnologie: | LiHD |
Battery capacity (Ah): | 5,5 |
Battery voltage: | 18 |
Akkufüllstandsanzeige: | ja |
CE marking: | yes |
Long tool-life: | yes |
Easy charging: | yes |
Fast-loading system: | yes |
Special features of the 2XR-J50 pneumatic nailer:
DESCRIPTION
Safety device, adjustable exhaust, side load magazine, no recoil, exhaust silencer, adjutable depth control, no mark tip
Tool works with:
Brads type J from 16 - 50mm length.
DIMENSIONS & WEIGHT
Weight: | 1.3 kg |
Width: | 56 mm |
Length: | 245 mm |
Height: | 244 mm |
TECHNICAL SPECIFICATIONS
Type of fastener: | Brads |
Fastener type: | J |
Length (mm range): | 16 - 50 |
Working pressure (bar): | 4,0 - 7,0 |
Air requirement (l/nailing): | 0,60 |
Safety yoke: | yes |
Side-loading magazine: | yes |
Safety yoke: | yes |
Depth adjustment: | yes |
Adjustable exhaust: | yes |
Silencer: | yes |
No recoil: | yes |
CE marking: | yes |
PKT-compatible: | yes, with PNEUMATIC MOBILO |
Varnish: | Powder-coated |
Weatherproof: | yes |
Splash-proof: | yes |
Light weight construction: | yes |
Rutschfester Handgriff: | yes |
Quick release tool closer: | yes |
Packaging: | Plastic Case |
Application area: | Glazing bead, Foot/ceiling batten, Decorative batten |
Fastener lenght: | 16, 19, 25, 30, 32, 35, 40, 45, 50 |
Special features for spiral hose 6x9mm Z160.11:
DESCRIPTION
Spiral hose 6 x 9 mm
- Length: 7,5 m
- Working pressure: 4 m
- Max. pressure: 13 bar
DIMENSIONS & WEIGHT
Weight: | 0.26 kg |
Special features for the VITAS100-AKKU compressor:
Battery compressor with brushless motor
Compressed air on the move: The light and compact VITAS 100-AKKU 18-volt battery compressor with brushless motor and a maximum pressure of eight bar is the perfect companion on the construction site or in the workshop. With a weight of around ten kilograms and a size of 330x310x390 millimetres, it is easy to transport and stands securely at all times with its rubberised feet. In combination with the PREBENA air tools, the oil-free piston compressor is ideal for work in interior design, woodworking and sanitary areas. With the battery charge of a 5.5 Ah battery pack, the VITAS 100-AKKU creates for example 1.100 upsetting head nails in soft wood. Manometers for boiler and outtake pressure and a universal coupling for all common connection systems guarantee easy operation.
>> Oil-free: no oil-change, no oil in condensed water
>> Integrated storage compartment for an exchangeable battery to continue working without interruption
>> Light and powerful
>> Running time with AKKU18-5,5-LiHD: approx. 60 minutes
>> Brushless motor for use in interior fittings and on construction sites
Standard Equipment:
Gauge for tank pressure, gauge for pressure exit, pressure reducer with gauge, regulated compressed air connection, vulcanised rubber feet, rubber grip handle
Weight: | 9.9 kg |
Width: | 315 mm |
Length: | 340 mm |
Height: | 380 mm |
Voltage (V): | 18 |
Vessel capacity (l): | 5 |
Intake capacity (l/min): | 100 |
Filling Capacity (l/min): | 72 |
Max. oressure (bar): | 8 |
Cylinder: | 1 |
Speed (rpm): | 2760 |
Noise characteristics dB (A): | 92 |
Oil-free / oil-lubricated: | Oil-free |
Stationary/Mobile: | Mobile |
Pneumatic air connections: | 1 |
Motor circuit breaker: | yes |
TÜV-certified safety valve: | yes |
Quick action coupling: | 1 |
Pressure regulator with pressure gauge and quick action coupling: | yes |
Air intake filter: | yes |
Drain valve on the pressure vessel: | yes |
Rubber handle: | yes |
Anti-vibration rubber feet: | yes |
Pressure gauge: | yes |
Quality pressure switch: | yes |
Pressure pipe ventilation: | yes |
Feet with suction cups: | yes |
Protective cover for engine: | yes |
Protective cover for pressure regulator: | yes |
Suitable for crane transport: | yes |
Bar-Produktfinder: | 0-10 |
Intake capacity-product finder: | 0-200 |