No results were found for the filter!
HOLZBAU-SET-RKP-E - (EINZELSCHUSS) Setinhalt: PKT-8-RKP100...
![HOLZBAU-SET-RKP-E - (EINZELSCHUSS) Setinhalt: PKT-8-RKP100 Hybridnagler,]( "HOLZBAU-SET-RKP-E - (EINZELSCHUSS) Setinhalt: PKT-8-RKP100 Hybridnagler,")
| Type of fastener | Nails |
| Fastener type | PR |
| Length (mm range) | 65 - 100 |
| Air requirement (l/nailing) | 0,00 (Keine Luftverbrauch) |
| Magazine capacity | 40 Nägel (1 Streifen) |
| Akkutechnologie | LiHD |
| Battery capacity (Ah) | 3, 4, 5,5, 8 |
| Battery voltage | 18 |
| shot capacity per battery charge | 700 (4,4 Ah), 1100 (5,5 Ah) |
| Akkufüllstandsanzeige | ja |
| Single fire | yes |
| Safety yoke | yes |
| Back load magazine | yes |
| Blank-shot protection | yes |
| Safety yoke | yes |
| Depth adjustment | yes |
| Silencer | yes |
| No recoil | yes |
| Belt hook | yes |
| Strong magazine | yes |
| CE marking | yes |
| PKT-compatible | yes, with Air cylinder KT-1000 |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Light weight construction | yes |
| Rutschfester Handgriff | yes |
| Quick release tool closer | yes |
| Air Cylinder KT-1000 inclusive | yes |
| Easy charging | yes |
| Adjustable degree of power | yes |
| Rubberized tool protection | yes |
| Fast-loading system | yes |
| Additional handle for left or right-hand use | yes |
| Quick release | yes |
| High Power | yes |
| Inspection window for magazine level | yes |
| High firing speed | yes |
| shot speed (shot/sec) | 1,5 |
| Reinforced driver | yes |
| Manometer for operating pressure | yes |
| Gauge for air level | yes |
| Packaging | Plastic Case |
| Application area | Exterior facing, Floor-ceiling-shuttering, Roof batten, Roof boarding, Bottom constructions, Trestle constructions, Wooden truss, Wood framing, Chimney shuttering, Boxes, Palettes, Visible shuttering, Saving formwork, Sliding shuttering, Eaves/verge shuttering, Substructure, Formwork, framework |
| Fastener lenght | 65, 70, 75, 80, 100, 90 |
Order number: HOLZBAU-SET-RKP-E
Quantity
1 piece
€1,781.43
*
€1,497.00 excl. VAT
Nettopreis: €1,497.00
6F-WN25SNS Corrugated Nailer for 20mm
![6F-WN25SNS Corrugated Nailer for 20mm]( "6F-WN25SNS Corrugated Nailer for 20mm")
| Type of fastener | Nails |
| Fastener type | WN |
| Length (mm range) | 25 |
| Working pressure (bar) | 5,0 - 8,0 |
| Air requirement (l/nailing) | 1,60 |
| Single fire | yes |
| Side-loading magazine | yes |
| Silencer | yes |
| No recoil | yes |
| CE marking | yes |
| PKT-compatible | yes, with PNEUMATIC MOBILO |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Light weight construction | yes |
| Rutschfester Handgriff | yes |
| Packaging | Metal Case |
| Application area | Furniture base, Obtuse angle, Frame, Bolt work |
| Fastener lenght | 25 |
Order number: 6F-WN25SNS
Quantity
1 piece
€1,879.01
*
€1,579.00 excl. VAT
Nettopreis: €1,579.00
SLIDER 5C-Z75-T with PREBENA Pneumatic Stapler for 35-75mm -with...
![PREBENA Slider 5C-Z75 Druckluftnagler 35-75mm Länge]( "PREBENA Slider 5C-Z75 Druckluftnagler 35-75mm Länge")
| Type of fastener | Staples |
| Fastener type | Z |
| Length (mm range) | 35 - 75 |
| Working pressure (bar) | 5,0 - 8,0 |
| Air requirement (l/nailing) | 2,30 |
| Single fire | yes |
| Safety yoke | yes |
| Top-load magazine | yes |
| Blank-shot protection | yes |
| Depth adjustment | yes |
| Adjustable exhaust | yes |
| CE marking | yes |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Light weight construction | yes |
| Rutschfester Handgriff | yes |
| Quick release tool closer | yes |
| Guide | yes |
| Adjustable lateral stop up to 140 mm | yes |
| Distance adjustment (mm) | 40, 60, 80, 110 |
| Quick release | yes |
| Roll-controlled automatic fire | yes |
| Packaging | Cardboard Box |
| Application area | Gypsum fibreboard, Drywall, Wood framing, Chipboard/Oriented structural board |
| Fastener lenght | 35, 38, 40, 44, 50, 55, 60, 64, 67, 75 |
Order number: SLIDER-5C-Z75-T
auf Anfrage
PKT-TWINTEC 400 Compressor
![TWINTEC 400]( "TWINTEC 400")
| Voltage (V) | 230 |
| Motor (kW) | 2,20 |
| Vessel capacity (l) | - |
| Intake capacity (l/min) | 160 |
| Filling Capacity (l/min) | 100 |
| Max. oressure (bar) | 330 |
| Frequency (Hz) | 50 |
| Cylinder | 3 |
| Speed (rpm) | 2760 |
| Electrical protection (A) | 16,0 |
| Noise characteristics dB (A) | 95 |
| Oil-free / oil-lubricated | Oil lubricated |
| Stationary/Mobile | Mobile |
| Pneumatic air connections | 3 |
| Motor circuit breaker | yes |
| TÜV-certified safety valve | yes |
| Quick action coupling | 1 |
| Pressure regulator with pressure gauge and quick action coupling | yes |
| Air intake filter | yes |
| Drain valve on the pressure vessel | automatic |
| Power cable length | 5,0 |
| Foldable transport handle | yes |
| Rubber handle | yes |
| Anti-vibration rubber feet | yes |
| Solid rubber wheels | yes |
| Pressure gauge | yes |
| Quality pressure switch | yes |
| Pressure pipe ventilation | yes |
| CE-electrical connection plug | yes |
| Protective cover for engine | yes |
| Protective cover for pressure regulator | yes |
| Electromagnetical pressure relief | yes |
| Suitable for filling PREBENA Compressed Air Cylinder | yes |
| Bar-Produktfinder | 0-10 |
| Intake capacity-product finder | 0-200 |
Order number: 0-TWINTEC400
Quantity
1 piece
€7,299.46
*
€6,134.00 excl. VAT
Nettopreis: €6,134.00
MODUL 11-Z64 Pneumatic Industrial Stapler with changeable magazine...
![PREBENA MODUL 11-Z64 Druckluft-Industrienagler 50-64mm Länge]( "PREBENA MODUL 11-Z64 Druckluft-Industrienagler 50-64mm Länge")
| Type of fastener | Staples |
| Fastener type | Z |
| Length (mm range) | 50 - 64 |
| Working pressure (bar) | 4,5 - 7,5 |
| Air requirement (l/nailing) | 1,80 (l/Heftklammer bei 6 bar) |
| Magazine capacity | 32 Staple strips |
| Blank-shot protection | yes |
| CE marking | yes |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Rutschfester Handgriff | yes |
| Changeable magazine | yes |
| Packaging | Metal Case |
Order number: MODUL11-Z64
Quantity
1 piece
€10,000.00
*
€8,403.36 excl. VAT
Nettopreis: €8,403.36
MODUL 11-Z80 Pneumatic Industrial Stapler with changeable magazine...
![PREBENA MODUL 11-Z80 Druckluft-Industrienagler 50-80mm Länge]( "PREBENA MODUL 11-Z80 Druckluft-Industrienagler 50-80mm Länge")
| Type of fastener | Staples |
| Fastener type | Z |
| Length (mm range) | 50 - 80 |
| Working pressure (bar) | 4,5 - 7,5 |
| Air requirement (l/nailing) | 3,40 (l/Heftklammer bei 6 bar) |
| Magazine capacity | 32 Staple strips |
| Blank-shot protection | yes |
| CE marking | yes |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Rutschfester Handgriff | yes |
| Changeable magazine | yes |
| Packaging | Metal Case |
| Fastener lenght | 50, 55, 60, 64, 67, 75 |
Order number: MODUL11-Z80
Quantity
1 piece
€10,000.00
*
€8,403.36 excl. VAT
Nettopreis: €8,403.36
MODUL 11-WP130 Pneumatic Industrial Stapler with changeable...
![PREBENA MODUL 11-WP130 Druckluft-Industrienagler 75-130mm Länge]( "PREBENA MODUL 11-WP130 Druckluft-Industrienagler 75-130mm Länge")
| Type of fastener | Staples |
| Fastener type | WP |
| Length (mm range) | 75 - 130 |
| Working pressure (bar) | 5,0 - 7,5 |
| Air requirement (l/nailing) | 5,10 (l/Heftklammer bei 6 bar) |
| Magazine capacity | 15 Staple strips |
| Blank-shot protection | yes |
| CE marking | yes |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Rutschfester Handgriff | yes |
| Changeable magazine | yes |
| Packaging | Metal Case |
| Fastener lenght | 75, 85, 100, 105, 110, 120, 130 |
Order number: MODUL11-WP130
Quantity
1 piece
€10,000.00
*
€8,403.36 excl. VAT
Nettopreis: €8,403.36
Slider 7F-CNW90 with PREBENA Pneumatic Nailer for 45-90mm
![PREBENA Slider 7F-CNW90 mit Druckluftnagler 45-90mm Länge]( "PREBENA Slider 7F-CNW90 mit Druckluftnagler 45-90mm Länge")
| Type of fastener | Nails |
| Fastener type | CNW |
| Working pressure (bar) | 5,0 - 8,0 |
| Air requirement (l/nailing) | 2,85 |
| Single fire | yes |
| Safety yoke | yes |
| Coil magazine | yes |
| Depth adjustment | yes |
| Adjustable exhaust | yes |
| CE marking | yes |
| Varnish | Powder-coated |
| Long tool-life | yes |
| Weatherproof | yes |
| Splash-proof | yes |
| Light weight construction | yes |
| Rutschfester Handgriff | yes |
| Quick release tool closer | yes |
| Guide | yes |
| Adjustable lateral stop up to 140 mm | yes |
| Distance adjustment (mm) | 40, 60, 80, 110 |
| Roll-controlled automatic fire | yes |
| Packaging | Cardboard Box |
| Application area | Wood framing, Industrial converting of oriented structural boards and more wooden plates, Chipboard/Oriented structural board |
| Fastener lenght | 45, 50, 55, 60, 65, 70, 75, 80, 90 |
Order number: SLIDER-7F-CNW90
Quantity
1 piece
€66,666.00
*
€56,021.85 excl. VAT
Nettopreis: €56,021.85
Trusted Shops Reviews Toolkit: 1.1.6